Pinhole leaks, burst pipes, corroded sections and failed joints, located and repaired. You get an honest answer on whether to repair the line or replace it. Same-day service is often available.
Every joint, fitting, and connection we install is covered. Parts and labor included.
We find the failure point first, then tell you whether a repair or a section replacement is the right fix.
Usually caused by corrosion inside the pipe and easy to miss until water damage shows up nearby.
We isolate the line, repair the break and check nearby sections for the same stress or age.
The damaged length or fitting is cut out and replaced with copper or matching material.
Burst sections and failed fittings on the line from the meter. Corroded end to end? See main water line replacement.
Not every leak calls for a full replacement. A targeted repair costs less, needs only minimal access and makes sense when the pipe is otherwise sound, such as isolated damage on newer copper.
A section replacement costs more and opens a section of wall or ground, but it is the better investment for recurring leaks or galvanized and CPVC pipe. It usually takes 1 to 3 days depending on the project.
If the same line has several failure points or is clearly near the end of its life, we will recommend replacing it rather than patching the same aging pipe again.
Corrosion inside a pipe restricts flow and weakens the wall until it leaks or bursts. When we find it during a repair, we tell you whether it is isolated or a sign that more of the system needs attention.
Keeping pressure in a safe range with a pressure-reducing valve protects joints, and treating hard water with a water softener slows the corrosion behind pinhole leaks.
Fixing the underlying condition often does more than repairing the same kind of failure again a year later somewhere else on the line.
Four quick questions and a simple magnet test on the line that brings water into your home. See what it is likely made of and whether it is time to replace it.
When was your home built?
A best guess is fine.
Which city is your home in?
Permit requirements depend on the city.
Try the magnet test
Grab any fridge magnet. It takes 30 seconds.
Have you noticed any of these?
Select all that apply.
If water is running now, shut off the main and call us.
We find the exact failure point by inspection.
You get a recommendation and a written price before work begins.
We open only what the repair needs.
The failed section, joint or fitting is replaced with copper or matching material.
The line is tested, and we flag any pressure or corrosion issues we noticed.
Real water line jobs we have completed across the South Bay and the Peninsula.


















Free Estimate
Tell us what you are noticing and we will confirm the scope, the permit and the timing.
Instant Quote
Answer a few questions about your home and your current pipes and get a personalized estimate online.
We are based on Stewart Drive in Sunnyvale and cover the South Bay and Peninsula
from there. If your city is not on the list, call us anyway. We often work just outside our
usual range.
The map shows where we work most weeks, not a fence. We are based in Sunnyvale and we regularly take jobs just outside it. One call tells you whether we can reach you and when.
Shut off the main water valve to stop the flow, then call us. We locate the source, stop the leak and tell you whether a repair or a section replacement is the right fix. We work daily from 7:00 AM to 10:00 PM.
Most pinhole leaks come from corrosion inside the pipe, often helped along by high pressure or hard water. A repair fixes the hole in front of us, but if the cause stays, the next one tends to appear somewhere else on the same line. We flag pressure or water quality issues we notice while we are there.
When the same line has several failure points, when it is galvanized or CPVC that keeps leaking, or when it is clearly near the end of its life. Patching it twice usually costs more than replacing it. See whole house water line replacement.
Copper in nearly every case, or material that matches the existing line where that is the better fit for the repair.
Yes, financing is available. You get the written price first, then decide how to pay. See financing options.
Fill this out and we will call you back with a real answer: what it usually turns
out to be, what it takes to fix, and what it costs. No charge for the
conversation.
GET A FREE ESTIMATE